Generation-expansion planning with linearized primary frequency response constraints

As renewable energy resources increasingly penetrate the electric grid, the inertia capability of power systems has become a developmental bottleneck. Nevertheless, the importance of primary frequency response (PFR) when making generation-expansion plans has been largely ignored. In this paper, we propose an optimal generation-expansion planning framework for wind and thermal power plants that takes PFR into account. The model is based on the frequency equivalent model. It includes investment, startup/shutdown, and typical operating costs for both thermal and renewable generators. The linearization constraints of PFR are derived theoretically. Case studies based on the modified IEEE 39-bus system demonstrate the efficiency and effectiveness of the proposed method. Compared with methods that ignore PFR, the method proposed in this paper can effectively reduce the cost of the entire planning and operation cycle, improving the accommodation rate of renewable energy.     

铸造式和焊接式主轴箱体的动态特性对比分析

利用有限元法和试验模态法对立式加工中心的铸造式和焊接式两种结构的主轴箱体进行了模态分析,分别获得了其前六阶固有频率和振型。通过对比两种方法获得的结果,验证了有限元分析模型的有效性。研究表明,两种主轴箱体的阻尼比接近,但焊接式主轴箱体的各阶固有频率均要高于铸造式主轴箱体的各阶固有频率。并且铸造式主轴箱体的固有频率更接近于机床主轴的常用工作频率,焊接式主轴箱体的则远离此频率。因此对于常用主轴转速而言,焊接式主轴箱体的动态性能要优于铸造式主轴箱体的动态性能。     

Chromatic processing for feature extraction of PD-induced UHF signals in GIS

Partial discharge (PD) detection is an effective means of discovering insulation faults in gas-insulated switchgear (GIS). One of the most extensively used methods in PD detection has historically been the ultrahigh frequency (UHF) method. This study evaluates the chromatic processing methodology and its key factors for feature extraction of UHF signals in GIS. Three types of artificial defects are installed in the GIS tank at 0°, 90°, and 180°, respectively. The features of the UHF signals are extracted in the chromatic space, and PD discrimination of the defects is achieved. The influences of processors are studied before the feature selections are suggested. The time-stepping method is proposed to determine the rules of UHF signal frequency characteristics that vary with time. Finally, the process and options of the chromatics-inspired methodology are summarized.     

Gait event detection algorithm based on smart insoles

Gait analysis is an effective clinical tool across a wide range of applications. Recently, inertial measurement units have been extensively utilized for gait analysis. Effective gait analyses require good estimates of heel‐strike and toe‐off events. Previous studies have focused on the effective device position and type of triaxis direction to detect gait events. This study proposes an effective heel‐strike and toe‐off detection algorithm using a smart insole with inertial measurement units. This method detects heel‐strike and toe‐off events through a time‐frequency analysis by limiting the range. To assess its performance, gait data for seven healthy male subjects during walking and running were acquired. The proposed heel‐strike and toe‐off detection algorithm yielded the largest error of 0.03 seconds for running toe‐off events, and an average of 0–0.01 seconds for other gait tests. Novel gait analyses could be conducted without suffering from space limitations because gait parameters such as the cadence, stance phase time, swing phase time, single‐support time, and double‐support time can all be estimated using the proposed heel‐strike and toe‐off detection algorithm.     

基于差频检测技术的高速AD单粒子翻转评估方法研究

本文基于差频检测的原理，提出一种在高频动态输入模式下，对高速高精度模数转换器（AD）的抗单粒子翻转效应进行评估的测试方法，并以一款8位3 GSPS高速AD为测试对象，设计开发了一套高速AD单粒子翻转效应测试系统，对目标器件进行了重离子试验。通过对试验结果的图像和错误数据进行分析，评估参试器件的抗辐照性能参数，为抗辐照高速高精度AD的加固设计提供数据支撑。     

F-OFDM仿真系统设计与时频同步算法

针对新一代5G波形的F-OFDM技术开展了研究,通过把一个宽带分为若干个子带,对每个子带进行滤波处理以实现更好的通信效能。基于Simulink平台进行了F-OFDM仿真系统的搭建,重点对F-OFDM符号同步方法和频偏估计方法进行了研究与仿真分析。实验结果表明,基于Chu序列相比采用PN序列可以获得更好的同步效果,基于导频的Classen频偏估计算法相比基于CP的CFO估计算法和基于训练序列的Moose估计方法可以获得更好的频偏估计效果。     

基于星座图对射频指纹识别方法的研究

针对星座图的射频(RF)指纹识别方案中,低信噪比环境下识别准确率低的问题,提出一种基于欧式距离与幅度距离的二维识别算法来进行RF指纹识别。该方案通过对星座图进行优化处理,可从优化后的星座图中提取识别性能更好的RF指纹,再通过二维识别算法来提高识别准确率。仿真结果表明:与仅用欧式距离作为判断依据的方法相比,所提出的二维识别算法的识别准确率最高可提升8%,在设备容量为50组的情况下识别准确率为77.8%,并且从优化后的星座图中所提取的RF指纹具有更好的唯一性和稳定性。     

一种射频抗电磁干扰的矿用红外温度传感器

设计了一种适用于复杂条件下实施井下温度探测的射频式红外温度传感器。借助于光学系统、光电探测器实时感应井下温度并提取温度信号,同时在DC-DC电源隔离模块中实施EMI滤波以抗电磁干扰,处理后的信号经过A/D转换、运算器放大后显示在LCD上,实施读取数据并记录在传感器的存储片上,实现了矿井复合灾害条件下的温度测试,测试精度控制在±2%。     

中高压变频器冷却方案比较和选型分析

随着电力电子器件的发展,性能优异的中高压变频器在各行各业中得到越来越广泛的应用,能否处理好变频器的散热问题是其长期稳定运行的关键。分析了中高压变频器热量产生来源,并从技术可行性、可靠性、经济性等角度对不同冷却方案的特点进行比较,并结合实际的工程案例,给出合理的变频器冷却方案选型建议,可作为工程电气设计时中高压变频器冷却方案选型参考。     

Optimized PI+ load–frequency controller using BWNN approach for an interconnected reheat power system with RFB and hydrogen electrolyser units

This paper investigates a renewable energy resource’s application to the Load–Frequency Control of interconnected power system. The Proportional-Integral (PI) controllers are replaced with Proportional-Integral Plus (PI+) controllers in a two area interconnected thermal power system without/with the fast acting energy storage devices and are designed based on Control Performance Standards (CPS) using conventional/Beta Wavelet Neural Network (BWNN) approaches. The energy storing devices Hydrogen generative Aqua Electroliser (HAE) with Fuel cell and Redox Flow Battery (RFB) are incorporated to the two area interconnected thermal power system to efficiently damp out the electromechanical oscillations in the power system because of their inherent efficient storage capacity in addition to the kinetic energy of the generator rotor, which can share the sudden changes in power requirements. The system was simulated and the frequency deviations in area 1 and area 2 and tie-line power deviations for 5% step- load disturbance in area 1 are obtained. The comparison of frequency deviations and tie-line power deviations of the two area interconnected thermal power system with HAE and RFB designed with BWNN controller reveals that the PI+ controller designed using BWNN approach is found to be superior than that of output response obtained using PI+ controller. Moreover the BWNN based PI+ controller exhibits a better transient and steady state response for the interconnected power system with Hydrogen generative Aqua Electroliser (AE) unit than that of the system with Redox Flow Battery (RFB) unit.